Guide to Unblocking Drains
Top 10 Basic Drain Cleaners to Consider. Pure Lye is just one of the top blocker, as both odour free and acid free. This blocker is a naturally occurring natural blocker which is very safe on pipes and users alike. Some of the other commonly used blockers include sodium hydroxide, lye, carbonates and others.
The Product itself. A popular blocker is pure Lye. However, not all types of Lye are suitable for your drain. Before using Lye you should read the manufacturer's directions carefully and ensure that it is of a level height. Also, ensure that the Lye has dissolved completely into the drain before you use.
I'm going to list out a step by step guide to unblocking drains in order to avoid having any accidents or further damage being done to your pipes. There are many types of unblocker products on the market and they can cause damage if not used properly.
The first thing we will look at is the two basic types of blockers available on the market. The first is Lye and the other is Sodium Hydroxide. Both are very corrosive and you do not want to use either of these as a drain unblocking product. You will also want to check the Lye and Sodium Hydroxide instructions for further instructions.
The next option available to unblocking drains is using simple tap water. You can use distilled water or purified water. If you are unsure whether it is clean enough, you can run it through a faucet and test it for a short amount of time. If you are still not happy you can try to purchase a liquid laundry detergent to use as a drain unblocking agent.
Other types of chemical additives are also used for unblocking. These are known as organic and may include things such as baking soda and bleach. If you would like to know more about the different types of chemicals available, I strongly suggest reading a guide to unblocking your pipes.
After reading the above, I would recommend going through the above guide and using the following steps to unblocking any and all drains in your home. If you feel you are unable to fix the problem by yourself then seek professional help. I have found a lot of drain unblocking devices online but they can be expensive.
Firstly you need to check your water pipe and find out where the problem is located. If it is near a window or a door then you will need to take action to prevent any water from coming in.
Once you have located the water source, turn off the main water supply to your house and take the first step towards unblocking the problem. Check your pipes for any cracks or breaks. Once you have found any leaks then you must repair or replace them. Be aware that sometimes the problem with the pipe is caused by rust, so make sure you are dealing with something that is safe. rust free.
If you have cracks in the pipe, you will need to cut out the damaged section of pipe with a razor blade. You may need to use a hammer for the second cut depending on the size of the pipe. Once you have done this you need to clean the area and coat it with caulk and paint. Ensure that the new pipe is long enough for you to handle it with ease, this will prevent any slips.
Once the old pipe is cut you should then glue the new pipe into place. Allow it to dry overnight and then you can apply another layer of caulk and paint to stop any leaks.